top of page

Connect Your Solar Edge System to the Monitoring App

The MySolarEdge app provides a user-friendly interface to monitor and control your SolarEdge inverter. If you need to reconnect your inverter to your home Wi-Fi network, follow these simple steps. You should have the following information handy while you follow the steps:

  • You home WiFi network name and password details

  • Make sure you have your home WiFi connection on your phone set to 'ON'.

Step 1: Download and Install the MySolarEdge App

If you haven't already, download and install the MySolarEdge app on your smartphone or tablet. It's available for both iOS and Android devices.

The mySolarEdge app will look like the above.

Step 2: Log In to your account.

  • Open the MySolarEdge app.

  • Log in to your existing MySolarEdge account.

Step 3: Access your Inverter Settings

  • Select the three lines on the top right of the screen.

  • Select 'Inverter Communication'.

  • ‍Scan the QR Code which Is usually located on the right side of your SolarEdge inverter or enter the inverter connection detail manually.

  • Move the on/off P switch to ‘P’ (left) and release within 5 seconds.

The Inverter is then connecting to your phone

Step 4: Reconnect to Your Home Wi-Fi

The status of your wifi connection will then be displayed

  • Select Configure (red button at the bottom of screen)

  • Select the desired Wifi network you wish to connect the inverter to.

  • Enter your WiFi password

  • Select 'Join'

The inverter will then attempt to connect to your wifi network. Once the inverter is successfully connected to your home Wi-Fi network, the app should display a confirmation message or status change. You can also test the connection by navigating away from the app and connecting to your regular home Wi-Fi network on your device


bottom of page